RESERVOIR TANK SYSTEM FOR LOW-PRODUCING WELL

Free shipping!*

Our reservoir tank system for low-producing wells can use your low producing wells to pump and store water through the night so that you have plenty to use during the day.

Our Springer Series TRADITIONAL Pump is designed specifically for residential water supply where a water tank is being used. The Springer Series TRADITIONAL Pump is submersible and installs inside your cistern or water tank, to be tied to either your existing pressure tank or one of our new Water Worker Pressure Tanks . Use our sample cistern installation layout drawing showing the location of the Springer Series TRADITIONAL Pump in relation to the other components included in this packaged system.

The Little Fuse PumpSaver (included in the kit) can be wired in between your existing well pump and the electric panel and is used to detect abnormal changes in pump motor activity (i.e., when well is dry) and is therefore used to protect the pump motor. You will need to select the voltage of your existing well pump to ensure we get you the correct PumpSaver. PLEASE NOTE: The PumpSaver will only work with well pumps up to 1.5HP. If you have a larger well pump, please let us know.

This packaged system includes:

* Springer Series TRADITIONAL Pump (available in 115V or 230V)

* Pump Saver & Overload Relay w/NEMA 3R Enclosure box (for protecting your existing well pump -- up to 1.5HP -- against running dry)

* Normally closed float switch (to turn off your existing well pump when reservoir tank gets full)

* Submersible wire splice kit

* (2) 1" Pipe gasket for tank penetration

* (1) Cable Weight for Float Switch Tethering

Need help deciding if this is the right kit for you?

Use our Buying Guide questionnaire to help determine if this kit is well-suited for your application.

ADDITIONAL PRODUCTS TO CONSIDER FOR THIS PROJECT:

* 20-Gallon Water Worker Tank (Contractor Grade)

* Pump Control/Tank Tee Kit

* 500 Gallon Freestanding Potable Water Tank

RECOMMENDED APPLICATIONS:

*Low Producing Wells

WIRE SIZING

INSTALLATION OF PUMP IN UNDERGROUND TANK

ASSEMBLING PRESSURE TANK AND TANK TEE COMPONENTS

WIRING OF FLOAT SWITCH (SWITCH IS PRE-WIRED TO PUMP, BUT THIS EXPLAINS HOW THE FLOAT SWITCH WORKS)