Shop All

Free or Fixed Shipping

On most products!

Need Help With Installation?

With decades of field experience we'll walk you through each step of your installation.

Field Tested

Quality products, lowest prices guaranteed!

Price Match

Found a better price? We'll match it.  Contact us for our price match guarantee!

Free or Fixed Shipping

On most products

Need Help With Installation?

With decades of field experience we'll walk you through each step of your installation.

Price Match

Found a better price? We'll match it.*

0
Wired WiFi PTLevel Tank Gauge
+3

Wired WiFi PTLevel Tank Gauge

FCF-Filter-08002
$209.99
In stock
1
Product Details
Brand: PAREMTECH

Meet the Wired WiFi PTLevel Tank Gauge

A plugged-in WiFi-connected liquid level monitor

If you have a WIFI signal at your cistern or tank, then this device is for you. Just plug in the device with the provided power supply, setup the WiFi connection and you’re good to go!

How does the PTLevel Wired WiFi work?

  • First the PTLevel is mounted on the top of your tank where it is connected to the provided 13′ of 5/32″ tubing. You can order more tubing if needed.
  • The other end of that small tubing is then connected to the weighted “Pressure Chamber”.
  • After the Pressure Chamber is lowered into your tank, the liquid pushes up into the chamber and creates an air pocket which is then analyzed by the PTLevel every minute.
  • The data is sent to our online services using your WiFi internet connection, where it is further processed into a level reading, alerts, history graphs, and more.
  • After the installation, you can start reviewing your liquid level data right away via the App or at ptdevices.com.

Features and Specifications

  • Communication online using a WiFi connection to the internet.
  • Powered by a provided IP44 low voltage power supply.
  • 13′ of tubing is supplied, but you can request more if needed.
  • Weather proof design. It can be installed outside with no issue.
  • -40°C to 100°C temperature range.
  • Water depth maximum with supplied Pressure Chamber and sensor – 18′. If deeper depths required, please contact us.
  • PTLevel device dimensions – 69mm x 140mm x 51mm.
  • Pressure chamber dimensions – 250mm total height, 91mm base diameter, 26mm base height, 22mm tube OD.
Save this product for later
Share by: